Hardwood screening and recoating is a cost effective process used to refresh and renew the finish on hardwood floors.

Here are the steps involved in hardwood screening and recoating:

1. Preparation:

• Clear the room of all furniture and objects.
• Remove rugs and carpets.
• Ensure the floor is clean and free of debris.

2. Inspection:

• Assess the condition of the existing finish, looking for scratches, wear and damage.

3. Screening:

• Use a floor buffer or orbital sander with a fine grit abrasive screen to lightly abrade the existing finish.
• This step removes surface imperfections and dulls the old finish to prepare it for adhesion.

4. Vacuum and Clean:

• Thoroughly vacuum and clean the floor to remove all dust and debris resulting from the screening process.

5. Application of New Finish:

• Apply a new coat of finish to the freshly screened floor.
• Apply the finish evenly using a applicator.
• Allow the finish to dry.

6. Repeat if Necessary:

• In some cases, a second coat of finish may be applied to achieve the desired level of sheen and durability.
• If a second coat is applied, it’s essential to allow the first coat to dry completely before proceeding.

7. Curing Time:

• Allow the newly applied finish to cure for the recommended time, usually about 24-48 hours.
• During this time, avoid foot traffic and furniture placement on the floor.

8. Cleanup:

• Once the finish has fully cured, you can replace furniture and rugs.

9. Maintenance:

• Implement a regular maintenance routine to preserve the newly refreshed floor, including routine cleaning and the use of protective pads on furniture.

Hardwood screening and recoating is a cost effective way to refresh the appearance of your hardwood floors and extend the life of the finish.